How to Build and Tune a Wind Chime: DIY for Beginners (2024)

Download Article

Our step by step guide to making wind chimes (that actually sound good)

Explore this Article

parts

1Materials

2Suspension Platform

3Creating Chimes

Other Sections

Video

Tips and Warnings

Things You'll Need

Related Articles

References

Article Summary

Co-authored byHannah MaddenReviewed byAmy Guerrero

Last Updated: March 16, 2024Fact Checked

Download Article

Do you love it when it’s windy out and you can hear the sounds of your neighbor’s wind chimes? These soothing, whimsical instruments make going outdoors that much more relaxing. And whether you’re an avid DIYer or a beginner craftsman, you can create your very own wind chime following our instructions. Keep reading to learn the materials you’ll need, the steps you should take, and the tuning process for your wind chime.

Things You Should Know

  • Drill 5 to 8 holes in a suspension platform. Thread a sail and a striker, then attach it to the center of the platform.
  • Cut your chimes to different lengths to create multiple notes. Drill holes in the top of the chimes so you can thread them.
  • Use cord to tie the chimes to the suspension platform.

Part 1

Part 1 of 3:

Materials

Download Article

  1. 1

    Choose metal tubes or pipes to produce vibrations. The sound the chimes will make depends on many factors, such as what the chimes are made of, how long they are, and how thick they are. The most common substances for chimes are metal tubes, pipes, and rods, which you can find at hardware stores, craft stores, or from scrap metal. Try to choose pipes that have a uniform thickness on all sides for an even tone.[1]

    • Pipes and tubes are the same in wind chimes. Rods are not hollow and sustain notes longer.
    • Hard metals such as steel and aluminum produce sharper tones. Soft metals such as copper produce softer tones.
    • Metal objects are good at producing vibrations, so non-metal chimes such as glass sound more hollow.
    • To test out the sounds of different metal pipes such as copper or aluminum, visit a chime store or rap on the pipes with something that creates vibration, such as a piece of wood.
    • You’ll be creating 5 to 8 chimes out of your pipes or rods. Depending on how long you’d like your chimes to be, you may need to buy multiple pipes and rods, or just 1 very long one.
  2. 2

    Buy synthetic cord to hold the pipes. These lines connect the base from which the chimes dangle to whatever holds the wind chime. Cords such as strong nylon are good for bearing the weight of the wind chime and can also be used when connecting the chimes and the striker.[2]

    • The support line material has little impact on the sound. It's how you hang the chimes that will determine sound, so choose line materials that will last.
    • If you want to hang the chime from a hook or a tree, buy a metal ring to tie to the lines at the top of the chime.

    Advertisement

  3. 3

    Pick out a wooden striker. Also called a clapper, the striker is the piece that fits between the chimes and bumps into them to create the vibrations that cause sound. Possible choices for strikers include redwood or hockey pucks.[3]

    • Strikers are often circular so that they can hit all chimes equally. Strikers can also be star-shaped, but these hit all chimes at the same time with less force.
  4. 4

    Cut a wooden suspension platform that’s bigger than the striker. The platform holds the chimes, letting them hang around the object that will strike them. Cut a circular piece of wood big enough for your design that’s 1 to 2in (2.5 to 5.1cm) wider than the striker.[4]

    • Suspension platforms are often made out of wood, metal, or plastic.
  5. 5

    Pick out a block of wood for the sail. The sail is the part that hangs from the striker. Extending lower than the chimes, it gets caught up in the wind, forcing the striker to move into the chimes. Sails are often rectangular or rounded and made of a substance that can be moved by a decent wind, such as a block of wood.[5]

    • The sail can be carved from wood into many artistic forms, such as animal shapes, but you may find it easier to choose a simple block of wood that you can drill into and hang from the striker with a suspension line.
    • A small sail will be less durable, but a bigger sail will require more wind to move.
  6. Advertisement

  1. 1

    Mark 5 to 8 points on the base. Find the center of the base and mark it. Then, measure 5 to 8 equidistant points around the edge of the base that are all equally as far away from the center. Mark those points with a pencil as well.[6]

    • Mark the other side of the base, too, to indicate where you plan on drilling holes to make the base hang from the wind chime's point of suspension if needed.
    • Keep the holes at least 14in (0.64cm) away from the edge of the base.
  2. 2

    Drill the holes with a 1/8 inch drill bit. Clamp the base to a work bench or table, then use a drill with a drill bit. Drill through each marked point, and then drill through the very center of the base (to create an opening for the striker).[7]

  3. 3

    Thread the sail and striker with a piece of suspension line. The length of the line is up to you: it all depends on how long you’d like these pieces to hang. For a 5ft (1.5m) thread, for example, fold the thread in half, then pull it through the sail and knot it. Make a second large knot where the striker will hang about 16in (41cm) or less above, then thread it through the striker.

    • Try to keep the sail close to the bottom of the longest chime. The longer the sail's support line, the stronger the wind has to be to move the sail and its extra weight.
    • Remember that wind velocity is often stronger the higher you hang the wind chime, so a sail too close to the ground also won't cause the chimes to sound as much.
  4. 4

    Attach the striker to the base with cord. Take the thread coming out of the top of the striker and run it through the hole you made in the center of the platform. On the top side, knot the thread securely.

    • If you decide you don’t like the length of the striker, you can adjust it later on.
  5. Advertisement

Part 3

Part 3 of 3:

Creating Chimes

Download Article

  1. 1

    Plan the tones that you want. The length and size that you cut your pipes determines which tones your chimes will make. In general, shorter chimes produce higher-pitched tones, while longer chimes create lower-pitched tones. Many commercial chimes play a 5-note pentatonic scale.[8] For a 1.5in (3.8cm) wide pipe on a C octave, for instance, you might use these measurements:

    • C9: 6.5in (17cm) long pipe
    • C8: 9.18in (23.3cm) long pipe
    • C7: 13in (33cm) long pipe
    • C6: 18.9in (48cm) long pipe
    • C5: 26in (66cm) long pipe
    • Looking for other scales? Check out this chart to find the notes and their chime measurements.
  2. 2

    Cut the chimes using a pipe cutter, hacksaw, or hand saw. Measure the length onto your chime material and mark it with a marker. Clamp the chime onto a workbench, then use your tool of choice to cut all the way through. For hand saws, be sure to choose a blade that is made for the kind of metal you are cutting.[9]

    • Your local hardware store may be able to cut the pipes for you. Just be sure to have your measurements handy.
    • If you have a piano, tune the chimes by playing a note and matching the sound they make when you rap on them. Then, cut off more of the chime as needed.
  3. 3

    Sand the edges to get rid of sharp points. Wrap the pipes in towels to protect them. Use a file or sander to wear down the sharp edges on points and get rid of any areas that might cut your skin or catch on your clothing. If you didn't cut enough off the pipes, you can sand off the excess here. Unless you're removing significant portions of the material, which makes the pitch higher, the chime's sound won't change.[10]

  4. 4

    Drill holes into the top of the pipes. The top holes are how the cord threads through each pipe to attach it to the base. Clamp each chime down once again, then use a 1/8 inch drill bit to drill a hole straight through the pipe.[11]

  5. 5

    Tie each chime about 34in (1.9cm) below the suspension platform. Cut a length of thread for each chime, then pull the thread through the holes at the top. Tie the chimes onto the base so they’re all an equal distance from it.[12]

    • Chimes that hang too low are more vulnerable in wind and move more, making the wind chime out of tune because the striker doesn't hit them evenly.
  6. Advertisement

Community Q&A

Search

Add New Question

  • Question

    How can I increase sound from wind chime?

    How to Build and Tune a Wind Chime: DIY for Beginners (20)

    Community Answer

    Keep the chimes tightly packed around the striker. Place them all at even lengths from the striker and each other. Add a striker and sail if you don't have one. Hang the wind chime higher from the ground and place it in an area where more wind can reach it.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 7Helpful 26

  • Question

    If I use copper tubing, what is the best and lowest maintenance way to prevent long-term corrosion from weather?

    How to Build and Tune a Wind Chime: DIY for Beginners (21)

    Community Answer

    Copper has its own corrosion resistance called "Patina". If you've ever seen green metal roofing, soffit or rain gutters, that's what this is. If you don't like either look and you want the reddish bright copper, you'll need to protect it from oxygen. A spray shellac or clear coat varnish with several coats will temporarily inhibit oxidation. Look for a product with UV stabilizers as sunlight tends to quickly break down most of these, especially water-based products.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 4Helpful 14

  • Question

    Is there any way to tune the chimes other than length adjustment?

    How to Build and Tune a Wind Chime: DIY for Beginners (22)

    Community Answer

    Use a frequency counter. There is a PC program that will count the frequency of sound if a regular counter is not available.

    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission.Support wikiHow

    YesNo

    Not Helpful 13Helpful 20

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

      Advertisement

      Video

      Tips

      • Be sure to keep testing your chime as you create it in order to achieve your own sound and sight preferences.

        Thanks

        Helpful6Not Helpful4

      Submit a Tip

      All tip submissions are carefully reviewed before being published

      Submit

      Thanks for submitting a tip for review!

      Advertisement

      Warnings

      • Cut material only with the proper safety gear and blades.

        Thanks

        Helpful2Not Helpful0

      Advertisement

      Things You'll Need

      You Might Also Like

      How toCreate Seashell Wind ChimesHow toMake a Bamboo Wind Chime
      How toMake a Crystal BallHow toPaint Concrete StatuesHow to Make a Wind Chime Out of a Glass Wine BottleHow toHang Wind ChimesHow toCover Windows Without Curtains2 Easy Renter-Friendly Options to Hang Your Window TreatmentsHow toMake Wind Chimes From Old SilverwareThe Best Ways to Take Care of an Indoor FountainHow toHide the Washer and Dryer in the KitchenHow toDecorate Your Room with Paper

      Advertisement

      More References (3)

      About This Article

      How to Build and Tune a Wind Chime: DIY for Beginners (35)

      Reviewed by:

      Amy Guerrero

      Arts & Crafts Specialist

      This article was reviewed by Amy Guerrero and by wikiHow staff writer, Hannah Madden. Amy Guerrero is an Arts and Crafts Specialist and the Owner of Sunshine Craft Co., a crafting studio based in Phoenix, Arizona. Amy specializes in macrame, DIY crafting, and teaching fiber arts. She offers monthly in-person and online workshops along with having developed a range of DIY craft kits for at-home projects. Amy holds a BS in Industrial Design from Philadelphia University. She worked as a graphic designer before starting her own business. Sunshine Craft Co. is a creative hub that offers a wide range of workshops, tools, and resources for any craft project to inspire creativity and community engagement. This article has been viewed 486,271 times.

      40 votes - 88%

      Co-authors: 36

      Updated: March 16, 2024

      Views:486,271

      Categories: Featured Articles | Metalwork and Wire Projects | Home Decor

      Article SummaryX

      To build and tune a wind chime, start by drilling holes in the platform that your chimes will be suspended from. Then, cut the chimes into different lengths so they’ll produce different tones. Next, drill holes in the chimes and the pieces of wood that hang down between the chimes. After that, thread the chimes and the wood pieces, then attach them to the platform by running the threads through the holes you drilled into the platform. Finally, check to make sure the parts hang evenly and securely, and the chimes make the desired sounds. To learn more, like how to test your wind chime after hanging it, keep reading!

      Did this summary help you?

      In other languages

      German

      Spanish

      Portuguese

      Russian

      French

      Dutch

      Indonesian

      • Print
      • Send fan mail to authors

      Thanks to all authors for creating a page that has been read 486,271 times.

      Reader Success Stories

      • How to Build and Tune a Wind Chime: DIY for Beginners (36)

        Gail Faso

        Sep 22, 2019

        "I have tons of wind chimes that the strings have failed over the years and have collected driftwood and other..." more

      More reader storiesHide reader stories

      If you buy through links on our site, we may earn a commission.

      Did this article help you?

      Advertisement

      How to Build and Tune a Wind Chime: DIY for Beginners (2024)
      Top Articles
      Latest Posts
      Recommended Articles
      Article information

      Author: Foster Heidenreich CPA

      Last Updated:

      Views: 5657

      Rating: 4.6 / 5 (56 voted)

      Reviews: 87% of readers found this page helpful

      Author information

      Name: Foster Heidenreich CPA

      Birthday: 1995-01-14

      Address: 55021 Usha Garden, North Larisa, DE 19209

      Phone: +6812240846623

      Job: Corporate Healthcare Strategist

      Hobby: Singing, Listening to music, Rafting, LARPing, Gardening, Quilting, Rappelling

      Introduction: My name is Foster Heidenreich CPA, I am a delightful, quaint, glorious, quaint, faithful, enchanting, fine person who loves writing and wants to share my knowledge and understanding with you.